Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Pollen Filter

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Cabin air filter

See other generations:
Video tutorial

First, locate the position of the cabin pollen filter, which in this case is found under the plastic grille between the windscreen and the engine compartment. To replace it, open the engine compartment and undo the nut and the three screws indicated in the images with arrows one and two. Undo and remove the Torx screws indicated with arrows three and four in the images.

Remove the plastic grille and extract the old filter from its position in the housing. Replace it with the new filter and reattach the grille.

Remember that this operation should be performed every 15,000 miles or at least once a year. The maintenance operation shown in the images is performed on a Ford Mondeo.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter in a Ford Mondeo
How to Replace the Pollen Filter in a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this tutorial video, see how to replace the pollen filter in a Ford Mondeo by following these simple steps: first, purchase a new pollen filter fr…
How to Replace the Pollen Filter on a Ford Mondeo?
How to Replace the Pollen Filter on a Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) In this video tutorial, we can see how to replace the pollen filter on a Ford Mondeo. The first step is to purchase a new pollen filter. The next ste…
Replacement of the Cabin Air Filter
Replacement of the Cabin Air Filter
Ford Mondeo / Fusion (2007-2014 / MK 3) Frequently replacing the pollen filter helps prevent allergies as it purifies the air in the cabin. The filter is located under the passenger side gl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos