Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Mustang
    4. : How to fit new speakers in the door

Ford Mustang - Video tutorial

Model: Ford Mustang MK 4 - Years 1994-2004
Part: Loudspeaker
Operation: How to fit new speakers in the door

The tools needed for this are simply a screwdriver and pliers. For safety, remove the negative pole cable from the battery. With a plastic tool, in order not to damage the body, remove the door armrest, paying attention to the cables connected to it. Unscrew the switch sealing screw and remove them. Remove the plastic cover around the opening handle and then remove the plastic caps that hide the door panel fixing screws and unscrew them. Gently remove the panel as well. Unscrew the speaker housing frame. Connect the cables to the new speakers that you will fix in their seat with the screws removed from the frame. Reassemble everything. Carry out the same operation on the other door.


Posted on 9 November 2023 by ScegliAuto



How to replace the exterior door handle of the Ford Mustang?
Ford Mustang (2005-2014 / MK 5, S197) To be able to replace the exterior door handle of the Ford Mustang you need to loosen the screws that secure the door panel: these screws are located
How to fit the new air filter
Ford Mustang (2015-2023 / MK 6, S550) In this guide we will mount the air filter, this is a very simple operation and you can also do it yourself if you know something about mechanics. Th
How to mount the pressure gauge on a mustang
Ford Mustang (2015-2023 / MK 6, S550) In this new video we are going to install a new pressure gauge on the car. To do this, it is necessary to detach all the rounded gray part by leverin

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos