Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform an oil change on a 2008 Ford Explorer

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Checks and maintenance

In this video, we see how to reset the oil light on a 2008 Ford Explorer. This procedure is necessary in case the oil light remains on after an oil change. The procedure is very simple and takes less than 1 minute to complete. To reset it, first start the instrument panel, then press the reset button on the panel and scroll to the setup menu option. Once on the setup menu, press and hold the button to confirm, then scroll to the oil option and press and hold the button for about 4 seconds. After resetting, restart the panel to verify that the reset was successful.

Posted on 17 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the Ford Explorer 2008?
Ford Explorer (2006-2010 / U251, MK 4) In the following guide, we will describe all the steps you need to follow if you need to locate the OBD port in the cabin of your 2008 Ford Explorer.…
How to reset the oil service on the Ford Explorer?
How to reset the oil service on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, we can see how to reset the oil service in the Ford Explorer, an extremely simple and quick operation to be carried out only once t…
How to reset the oil service in the Ford Explorer?
How to reset the oil service in the Ford Explorer?
Ford Explorer (2006-2010 / U251, MK 4) In this tutorial we can see how to reset the oil service in the Ford Explorer, an extremely simple and quick operation, to be carried out only once a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos