Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Inner Door Panel of the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

To remove the inner door panel of the left front door of a Ford Focus, remove 5 screws using a Torx spanner: the first screw is located at the outer top side, remove the cover with a screwdriver and unscrew the screw; the second screw is behind the door handle, remove the cover with a screwdriver and unscrew the screw; the third screw is in the handle that closes the door, remove the outer plastic of the armrest with a screwdriver, lift the part of the window switch with a screwdriver, disconnect the connectors and unscrew the screws; the other screw is behind the internal reflector, release it with a screwdriver and unscrew the screw; remove the speaker cover by unclipping it towards the cabin, unclip the tabs to extract the speaker and finally disconnect the connector.

At this point, unclip the door panel by moving it with your hands and pulling it; finally, unclip the cord of the handle and some connectors, and the panel has been removed.

To refit it, follow the same reverse procedure.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

Ford Focus (2011-2018 / MK 3) To replace the window switch button on a Ford Focus, first remove the trim along the door handle, above which is the panel containing the button. Aft…
Ford Focus (2004-2011 / MK 2, Focus 2) To remove the door panel of the 2010 Ford Focus, first disconnect the triangle on the side and then remove the cover of the locking handle to access …
Ford Focus (2011-2018 / MK 3) Want to remove the door panel? Here’s how to take off the front panel of a Ford Focus. Unscrew the screws located in the space of the upper door open…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos