Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2016 Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Service warning light

After performing the car service or engine oil change on the 2016 Ford Transit, it is necessary to complete the procedure by resetting the warning light. Turn off the instrument panel and then press the accelerator and brake pedals at the same time. Turn on the instrument panel after three seconds and the message "Oil warning light ready to reset" will appear on the display, release the pedals and the oil warning light will be reset. If the warning light comes back on after resetting, it may be necessary to visit a workshop for a computerized diagnosis. The reasons for the failure to reset may include issues with the engine control unit, a punctured oil pan, or a malfunctioning tank sensor.

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Transit
How to reset the service light on the Ford Transit
Ford Transit (2000-2006 / MK 6) To reset the service light on a Ford Transit vehicle, model produced from 2001 to 2006, we must: - insert the key; - turn the key to the first positi…
How to reset the "Service" light on a Ford Transit?
How to reset the "Service" light on a Ford Transit?
Ford Transit (2014-2024 / MK 8) To reset the "Service" light on a Ford Transit, start by turning on the instrument panel. Next, access the onboard computer using the steering wheel …
How to Reset the Service Light on a Ford Transit Mk6
How to Reset the Service Light on a Ford Transit Mk6
Ford Transit (2000-2006 / MK 6) If the service light on the instrument panel of your Ford Transit Mk6 (2000-2006) continues to illuminate despite having completed the regular servic…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos