Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Maintain Tyres on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

Start by turning on the ignition with the key, then press the button near the steering wheel to access the tyre maintenance menu as shown in the video. Based on the menu instructions, inflate or deflate the tyres as needed. Carefully adjust all four tyres. Further check the tyre pressure with the compressor's pressure gauge. Finally, double-check everything and turn off the ignition after maintenance.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Perform the Service Reset on Ford Focus
How to Perform the Service Reset on Ford Focus
Ford Focus (2011-2018 / MK 3) Let's see how to perform the service reset on a Ford Focus. To reset the maintenance light: turn on the ignition with the appropriate key, and use th…
How to Maintain Our Ford Focus
How to Maintain Our Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to maintain our Ford Focus? This guide explains how to replace the battery: open the car door and pull up the engine compartment release lever lo…
TPMS reset on a Ford Focus
TPMS reset on a Ford Focus
Ford Focus (2011-2018 / MK 3) In today's video, we can see how to reset the TPMS, which is the tire pressure reset, on a Ford Focus, third generation model produced from 2011 to 2…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos