Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Starter motor

In this tutorial we can see how to replace the starter motor in the Ford Fiesta, a simple operation but one that requires good manual skills. First of all, we open the engine hood, then disconnect the negative terminal of the battery in order to work in complete safety. We then lift the front side of the vehicle, go underneath it and locate the starter motor, which is located near the oil filter. At this point, we disconnect both the indicated connector and the power poles of the starter motor, unscrew the three fixing bolts with a 13mm wrench and separate it from the support. To install the replacement, simply follow the reverse procedure.

Posted on 31 July 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the starter motor of a Ford Fiesta?
How to replace the starter motor of a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the starter motor of a Ford Fiesta, start by disconnecting the battery to avoid short circuits. Lift the vehicle with a jack and secure it…
How to Replace the Starter Motor on a Ford Fiesta?
How to Replace the Starter Motor on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the starter motor on a Ford Fiesta, raise the car using a ramp or jack to access its underside. The starter motor is located near the engi…
How to Remove the Starter Motor on a Ford Fiesta
How to Remove the Starter Motor on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove and replace the starter motor on a Ford Fiesta? First, use a socket spanner to disconnect the battery power cables; remove the soundpro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos