Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G70
    4. : How to replace the cabin air filter on Genesis Gv70

Genesis G70 - Video tutorial

Model: Genesis G70 MK 1 - Years 2018-2024
Part: Cabin air filter
Operation: How to replace the cabin air filter on Genesis Gv70

To be able to replace the passenger compartment air filter, proceed as follows: access the passenger compartment, locate the glove compartment under the dashboard and open it. Unhook the support lever located on the left side and unscrew the support pins located on the internal sides of the compartment. Extract the compartment and, at the rear, there is the filter housing compartment. Pull the flap towards you to open it and extract the filter. Take the new filter (identify the model suitable for the car, see the use and maintenance manual). Insert the new filter into the housing, close the flap and refit the glove compartment.


Posted on 25 April 2024 by ScegliAuto



Replace the cabin air filter on the Genesis G70
Genesis G70 (2018-2024 / MK 1) Let's see in this short and simple guide the steps that will allow us to remove and replace the cabin air filter of the Genesis G70. First we get on
How to activate the smart assistant remotely for the Genesis G70
Genesis G70 (2018-2024 / MK 1) Your Genesis G70 offers a remote smart assistant, accessible via smartphone and the Genesis connect Services app. The video explains how to use the I
How to mount an iPhone holder on the Genesis G70.
Genesis G70 (2018-2024 / MK 1) As explained in the video, adding this phone holder to your Genesis G70 car is very simple. First, you need to purchase an 18-gauge sheet of metal, p

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos