Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a GMC Canyon?

Model: GMC Canyon MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

After changing the oil and filter on the GMC Canyon, you need to manually reset the oil life and the light on the dashboard. This tutorial shows you how to proceed.

Start by inserting the key and turning on the ignition; you don’t need to start the engine. Next, navigate to the oil life screen by repeatedly pressing the button located under the speedometer.

Once you do this, press and hold the same button for about 3 seconds, or until you hear a series of chimes. To verify that the operation was successful, restart the vehicle.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a GMC Canyon?
How to Reset the Oil Service Light on a GMC Canyon?
GMC Canyon (2004-2012 / MK 1) In this tutorial, you will see how to reset the oil service light on the GMC Canyon pickup, a very simple and quick operation to perform only after c…
How to Replace the Key Fob Battery for GMC Canyon 2
How to Replace the Key Fob Battery for GMC Canyon 2
GMC Canyon (2015-2022 / MK 2) To learn how to properly replace the battery in your GMC Canyon Mk2 key fob (2015-2021), follow the steps outlined in this mini guide. First, make su…
How to Reset the Oil Light on a GMC Canyon
How to Reset the Oil Light on a GMC Canyon
GMC Canyon (2004-2012 / MK 1) To reset the engine oil light on your GMC Canyon, follow these few simple steps. First, get inside the vehicle and insert the key to turn on the inst…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos