Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on a Holden Trax

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Video tutorial

For many years, all vehicles have an OBD port, which is the interface that allows the vehicle to communicate with current diagnostic systems that are all computer-based. Through the OBD port, even regular users can access all the errors generated by the various control units that populate our vehicle, using an OBD reader that can be purchased for a modest price on any e-commerce platform; prices start around $100, or if you have a laptop, you can install the software and proceed with that.

But let's return to our Holden Trax, where the OBD port - since it is a vehicle that operates in Australia with right-hand drive - is located immediately to the right of the steering column, between it and the driver's door, just below the cover where the fuses are stored.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on the Holden Trax
Where to Find the Fuse Box on the Holden Trax
Chevrolet Trax (2013-2020 / MK 1) To address one or more electrical components in your Holden Trax, you need to know the location of the respective fuses. In this guide, we will disco…
How to Replace the Front Bulb on a Holden Trax
How to Replace the Front Bulb on a Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, we will show you how to replace the headlight bulb on a Holden Trax. This video also applies to its twin, the Chevrolet Trax, and t…
How to Reset the Service Light on Holden Trax
How to Reset the Service Light on Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, you will see how to reset the expired service light on the Holden Trax. This tutorial also applies to other models of similar age. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos