Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Captiva
  6. : How to reset the service light on a 2011 Holden Captiva.

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva CG - Years 2006-2016
Part: Instrument cluster
Operation: How to reset the service light on a 2011 Holden Captiva.

The manual reset procedure for the service light on your 2011 Holden Captiva is very simple and we will discover it below. First, you need to go inside the vehicle and make sure the dashboard is turned off. Then, insert the key and turn on the dashboard. At this point, hold down the accelerator pedal for two seconds and release it. Repeat this step three more times and then turn off the dashboard. Finally, turn on the instrument panel and the service light reset is successfully completed. If there are any errors, you can start the process again from the beginning.


Posted on 17 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos