Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Mass Air Flow Sensor on a Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: MAF sensor

Is the air sensor (mass air flow sensor) in the engine bay not working anymore? Here’s how to properly remove and replace the air temperature sensor on a Honda CR-V. Open the bonnet, lift it, and secure it. Disconnect the sensor's power connector (located on the air hose) using your fingers, remove the valve from its seat (unscrew the fastening bolts with an appropriate screwdriver). After comparing the damaged valve with the new one, mount it onto the air hose in the engine bay. Test the correct operation of the vehicle.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to clean the mass air flow sensor on a Honda CR-V.
How to clean the mass air flow sensor on a Honda CR-V.
Honda CR-V (2007-2012 / MK 3) Some engine performance issues can be caused by a dirty mass air flow sensor that does not perform its readings correctly. In this video, you will se…
How to Remove the Centre Console on a Honda CR-V
How to Remove the Centre Console on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Learn how to remove the centre console on a Honda CR-V. Use a plastic trim tool to pry off the cover located at the rear of the centre console, and r…
How to Remove the Starter Motor from a Honda CR-V
How to Remove the Starter Motor from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Let's see how to remove a starter motor from a Honda CR-V. First, use a socket wrench to disconnect the battery power cables, then lift the car on a …

Other guides you may be interested in

How to Set the Time on a Mercedes Vito Van?

In this tutorial, you can see how to set the time on a Mercedes Vito van, an extremely simple and quick operation, for example, after replacing the battery or after switching to daylight saving time. First, insert the key and turn on the instrument cluster, then repeatedly press the "M" button located to the left of the dashboard until you reach the screen displaying the time in flashing mode. At this point, adjust the hour using the "+" and "-" buttons located on the opposite side, switch to minutes using the "O" button, and finally save the setting.

Watch the video!


by ScegliAuto

More videos