Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Change

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

It may seem like a complex task, but changing the oil is a straightforward process that can be completed in a few steps. First, lift the front of the car to work underneath.

Open the bonnet and unscrew the oil filler cap. Obtain a container to collect the old oil. From underneath the engine, use a spanner to unscrew the oil filter and allow the oil to drain out. Next, using a 17mm spanner, unscrew the plug located under the engine and let the remaining oil flow out. Before refitting the new filter, apply a little oil to the gasket and then screw it into position without overtightening.

After closing the lower plug, you can begin adding the new oil. Start the engine for a few minutes and then check the level.

Top up if necessary.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2012 Honda Civic
How to Reset the Service Light on a 2012 Honda Civic
Honda Civic (2006-2012 / MK 8) After completing the service steps such as changing the oil and oil filter, it is necessary to update the mileage for the next service. To perform th…
How to Reset the Service Light on the Honda Civic
How to Reset the Service Light on the Honda Civic
Honda Civic (2016-2021 / MK 10) Through this brief procedure, you will learn how to reset the service light for the engine oil change maintenance on the Honda Civic. First, get insi…
How to perform a service on your own Honda Civic EJ9 (MK7)
How to perform a service on your own Honda Civic EJ9 (MK7)
Honda Civic (2001-2006 / MK 7) To change the oil and filter on a Honda Civic MK7, you will need just under 4 litres of 10W140 semi-synthetic oil and a filter that can be found on A…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos