Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check and Top Up the Engine Oil of the Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Engine oil

Today, check and top up the engine oil of the Honda CR-V. Pull the lever to unlock the bonnet, located next to the clutch pedal. Now open the bonnet and remove the dipstick, clean it, and replace it. Once done, pull it out again to accurately check the oil level. At the bottom of the dipstick, there are two holes; the upper one indicates the maximum oil level and the lower one the minimum level. If the oil level is low, unscrew the oil filler cap next to the dipstick and add the missing engine oil.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to check the engine oil level of the Honda CR-V
How to check the engine oil level of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today's information will show us how to check the oil level of the Honda CR-V engine, in simple and quick steps. First, we open the hood of the car a…
Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
How to Change Engine Oil and Filter on a Honda CR-V
How to Change Engine Oil and Filter on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) How do you change the engine oil and filter on a Honda CR-V? This is a straightforward operation if you follow the right steps. Lift the car on a col…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos