Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level of the Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Today's information will show you how to check the engine oil level of the Honda CR-V in simple and quick steps. First, open the vehicle's bonnet and start by pulling out the engine oil dipstick located at the top; with a clean cloth, wipe the end where the markings are, as shown in the video.

Now, reinsert the dipstick and pull it out again after a couple of seconds, checking the engine oil level; remember to perform this operation when the engine is cold, topping up if necessary!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Check and Top Up the Engine Oil of the Honda CR-V
How to Check and Top Up the Engine Oil of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today, check and top up the engine oil of the Honda CR-V. Pull the lever to unlock the bonnet, located next to the clutch pedal. Now open the bonnet …
Oil and Filter Change on a Honda CR-V
Oil and Filter Change on a Honda CR-V
Honda CR-V (2023-2026 / MK 6, RS) In this video, you will see how to change the oil and filter on a Honda HR-V from 2023 onwards. Start by removing the lower engine cover, then unscre…
Honda CR-V Gearbox Oil Replacement
Honda CR-V Gearbox Oil Replacement
Honda CR-V (2002-2007 / MK 2) In this video tutorial, you will learn how to replace the automatic gearbox oil in a Honda CR-V, following the video tutorial and the instructions be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos