Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr Z
    4. : Replacement rubber mats

Honda Cr Z - Video tutorial

Model: Honda Cr Z MK 1 - Years 2010-2016
Part: Accessory Kit
Operation: Replacement rubber mats

This video shows us how to replace the rubber mats; Once the old rubber mats have always been removed, if previously in possession, we will replace them with the new ones specially built to perfectly adhere to the type of floor depending on the car and model. In this case, once the driver's side mat has been positioned and spread, it must be anchored using the two clips located near the seat lever and we will be sure that it will not slide forward or move. As for the passenger side mat, it will only be necessary to spread it out and let it take the shape well on the surface.


Posted on 25 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos