Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of My Honda Civic 1.6 by Myself

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and oil filter of a Honda Civic in your home garage, you can do it yourself, but it requires some skill. First, open the bonnet.

Go under the car and locate the oil sump, which has the label "engine oil" indicating the oil drain plug. Unscrew the oil filler cap and lift the dipstick.

Then, using a 17 mm socket, unscrew the oil drain plug, placing a container underneath. After draining the oil, clean the plug and refit it. Using a special tool for filters, unscrew the oil filter, again placing a container underneath.

Lubricate the new filter with a bit of fresh oil and refit it. Go to the top, and using a funnel, pour in the litres of oil specified by the manufacturer. Reinsert the dipstick, remove it, clean it, and reinsert it again.

Pull it out once more and check the oil level. If necessary, top up the oil; otherwise, close the oil filler cap and replace the dipstick.

Finally, close the bonnet.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Honda Civic (2016-2021 / MK 10) To change the engine oil of the Honda Civic, loosen the screws securing the plate at the bottom of the engine bay, which protects the oil sump. Once …
Honda Civic (2016-2021 / MK 10) Through this brief procedure, you will learn how to reset the service light for the engine oil change maintenance on the Honda Civic. First, get insi…
Honda Civic (2016-2021 / MK 10) The following steps will allow us to reset the service reminder for the regular maintenance of the engine oil change on the Honda Civic. First, we ge…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos