Do it yourself
Frequently asked questions about cars and motorcycles

How to change the manual transmission oil on the Hyundai I10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Transmission fluid

See other generations:
Video tutorial

In this video, we will see how to change the oil of a manual gearbox of a Hyundai I10: first, we remove the front wheel from the left side in order to access the oil drain plug of the gearbox. (it is always recommended to unscrew the top-up cap before draining the old oil) we will need a 24 key. To reach the top-up cap, we will have to remove the battery and its support.

To remove the cap, it will be necessary to remove the screw holding the clutch sheath bracket, with a 12 key. For more space, it is advisable to remove the air filter duct.

Once the top-up cap is removed, we can remove the drain plug and drain the oil into a container, which we will then dispose of properly at an authorized center. The cap must be replaced, along with the gasket.

The oil is refilled using a special syringe that can be found, for example, on Amazon with the code B09G1M5J8R at a price of 10.99 euros, including delivery costs. Approximately two liters of oil are needed for the gearbox, after which we can put everything back in place in reverse order, and we have finished our work.


Posted on 29 September 2025 by ScegliAuto


Related tutorials

Hyundai I10 (2007-2013 / PA, MK 1) To replace the gear oil on a Hyundai I10, access the underside of the engine bay, where you will need to remove the protective panel covering the bot…
Hyundai I10 (2013-2020 / MK 2, IA) The issue of the faux leather covering wearing out or coming off is a common fault on Hyundai i10s, even on newer models. To replace it, remove the o…
Hyundai I10 (2013-2020 / MK 2, IA) If you have driven a certain number of miles since the last service and the Service light has come on in your Hyundai i10, you can change the oil and…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos