Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Localization and diagram of the fuse boxes of the Hyundai I10 MK2

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuse box

See other generations:
Video tutorial

We see the location and in the video the diagram of the fuse boxes of the Hyundai I10: we find the cabin box located on the left side of the steering wheel, at the bottom of the dashboard (for left-hand drive). For right-hand drive, it is in the same position, but on the right side of the steering wheel.

In the engine compartment, the box is located to the right of the starter battery, so in front of the driver (left-hand drive). Inside the fuse/relay panel there is a label that describes the name and capacity of each component, as well as its location mirrored to the box being examined.


Posted on 22 October 2025 by ScegliAuto


Related tutorials

Location and Diagram of the Fuse Boxes for the Hyundai i10
Location and Diagram of the Fuse Boxes for the Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) Here’s the layout of the fuse boxes for the Hyundai i10. In left-hand drive vehicles, the fuse box is located on the left side of the steering wheel …
How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…
Location and Diagram of the Fuse Boxes in the Hyundai i10 2013
Location and Diagram of the Fuse Boxes in the Hyundai i10 2013
Hyundai I10 (2007-2013 / PA, MK 1) You will find the fuse box inside the cabin of the Hyundai i10, at the bottom of the dashboard on the driver’s side, in a box with a handle that open…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos