Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter of the Hyundai Staria.

Model: Hyundai Staria MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Diesel fuel filter

Video tutorial

Let's see how to change the fuel filter on this Hyundai Staria diesel. The filter is located underneath the vehicle, on the left side.

It would be a good idea to disconnect the negative terminal of the battery and unplug the fuel pump connector, then start the engine and let it run until it stalls to relieve the residual pressure. Let's go under the vehicle and clean the area around the filter, place a container, and disconnect the hoses; remove the filter and dispose of it along with the fuel as special waste.

Take the new filter with the accompanying gasket, fill it with clean diesel, and install it. Reconnect the hoses and, if there are any clamps, tighten them moderately. Reattach the fuel pump connector: if there is a manual pump near the pump, press it until you feel resistance; otherwise, turn the ignition on without starting the engine 2-3 times so that the electric pump primes automatically.

Reconnect the battery. Done.


Posted on 6 December 2025 by ScegliAuto


Related tutorials

How to Tint the Windows of the Hyundai Staria?
How to Tint the Windows of the Hyundai Staria?
Hyundai Staria (2021-2026 / MK 1) The windows, both front and rear, of the Hyundai Staria can be tinted using a cost-effective DIY method. What you need is the appropriate black film,…
Where to Find the Fuse Box on the 2022 Hyundai Staria
Where to Find the Fuse Box on the 2022 Hyundai Staria
Hyundai Staria (2021-2026 / MK 1) If you don’t know where the fuse box containing all the fuses for your 2022 Hyundai Staria is located, read this guide carefully to find it easily an…
In the Hyundai Staria, how do you reset the Service light?
In the Hyundai Staria, how do you reset the Service light?
Hyundai Staria (2021-2026 / MK 1) Here is described the way in which owners of the Hyundai Staria will be able to reset the service light immediately after performing the scheduled ro…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos