Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Engine oil

Changing the engine oil on a Hyundai Getz, here’s how to proceed with the replacement. Lift the engine bay bonnet and secure it, then raise the car on a column lift or jack. Undo the sump plug and allow the fluid to drain into a disposal container, then refit the sump plug. Use an oil filter wrench to remove the oil filter. Fit a new oil filter in the designated housing. Lower the car and top up the engine oil reservoir with new fluid. Check the oil level in the engine with the dipstick.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Where to Find the Fuse Box on the Hyundai Getz
Where to Find the Fuse Box on the Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Before locating the fuse box on your Hyundai Getz, remember that any maintenance or replacement of fuses must be done with the engine off and the bat…
Guide to Replacing the Timing Belt on a Hyundai Getz 1.1
Guide to Replacing the Timing Belt on a Hyundai Getz 1.1
Hyundai Getz (2002-2011 / MK 1) In this guide, you will find instructions for removing and replacing the timing belt on a Hyundai Getz 1.1. First, open the engine bonnet and start b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos