Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aftermarket Xenon Kit

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Accessory kit

To carry out the installation, it is necessary to remove the headlights: disconnect the connector attached to it and proceed with removing the headlight (it is not necessary to remove the front bumper).
Once the headlight is removed, take off the rear cover and extract the original bulb. Position the kit's control unit near the headlight, connect the two terminals of the control unit's wiring to the connector inside the headlight, and insert the xenon bulb: you will need to make a hole in the cover for the wires to pass through. Proceed in the same manner for the other headlight and pay attention to the positioning of the control units and wiring.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Aftermarket H11 Xenon Kit
Installation of Aftermarket H11 Xenon Kit
Hyundai Elantra (2015-2020 / MK 6) To install the xenon bulbs with their respective ignition units, you need to remove the headlights to properly accommodate the wiring. Start by openi…
Replacement of Bulbs with LED in the Cabin
Replacement of Bulbs with LED in the Cabin
Hyundai Elantra (2015-2020 / MK 6) Open the sunglasses compartment of the front interior light and use a plastic lever to detach the bulb cover. Then, remove the original halogen bulbs…
Instructions for Replacing the Power Steering Pump
Instructions for Replacing the Power Steering Pump
Hyundai Elantra (1995-2000 / J2, MK 2) Replacing the power steering pump on the car model in question is quite straightforward due to its location; start by loosening the mounting bolts of…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos