Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Ignition Cylinder and Steering Lock from Hyundai Getz

Model: Hyundai Getz MK 1 - Years 2002-2011

This video provides the main instructions for removing the ignition cylinder and steering lock from a Hyundai Getz. First, remove the steering wheel along with its airbag by unscrewing the fixing screws and disconnecting the electrical connector. Then, use a drill bit to grind down the fixing pins of the steering lock system. Once the pins are unscrewed, remove the ignition cylinder by disconnecting the electrical connectors attached to it. Finally, replace everything by applying the reverse procedure of disassembly!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses on the Hyundai Getz?
Where are the Fuses on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) The fuses on the Hyundai Getz are located inside two fuse boxes installed within the vehicle: this model has two. The first is positioned inside the …
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Removing the Original Radio from a Hyundai Getz
Removing the Original Radio from a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) Is it really that simple to remove an original radio from a Hyundai Getz? Follow this video closely to see how to perform the removal according to th…

Other guides you may be interested in

    Frequently Asked Questions

    • Getz 2002-2011 - Where is the oxygen sensor located in a Hyundai Getz? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos