Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Genesis
    4. : How to locate fuse boxes and know their assignment schemes in a Hyundai Genesis

Hyundai Genesis - Video tutorial

Model: Hyundai Genesis BH - Years 2008-2016
Operation: How to locate fuse boxes and know their assignment schemes in a Hyundai Genesis

In this video we can learn about the location of the fuse boxes and the related assignment diagrams of the same in a Hyundai Genesis car. The first fuse box can be found in the passenger compartment of the vehicle, on the driver's side, exactly behind the dashboard located at the bottom left of the steering wheel and contains fuses assigned to: A / C control module, Smart key, BCM, multimedia system, navigation system , parking sensor, instrument panel, start and stop button ignition, SRS, etc. The second box is located in the engine compartment and contains fuses assigned to: alternator, battery, IGPM, TCM, ESC, injectors, solenoid, capacitor, cruise control, etc. The third box is located in the luggage compartment, behind the side carpet and contains fuses assigned to: fuel pump, AMP, door locks, electric passenger seat, rear seat heating, fog lamps, etc.


Posted on 10 August 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos