Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

Remove the plastic cover on the engine to access the filter; position the vehicle on suitable car ramps to facilitate access to the oil sump and unscrew the oil drain plug; once the oil has drained, re-screw the plug; then unscrew the cap of the oil filter container to extract the old cartridge, insert the new one, replacing the o-ring seals that are always included in the new filter kit, lubricate them with clean oil, and tighten the cap without exceeding the torque specification.

Then fill the engine with clean oil until the correct level is reached.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Hyundai Sonata (2004-2014 / ) Replacing the engine oil and filter is typical DIY maintenance: dispose of the used oil at a designated collection centre. Position a container under…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Hyundai Sonata (2004-2014 / ) The oil filter is of the cartridge type and is located on the right-hand side of the engine (when viewed from the front), near the hose connecting th…
Replacement of Engine Oil and Oil Filter
Replacement of Engine Oil and Oil Filter
Hyundai Sonata (2004-2014 / ) Lift the vehicle on suitable car ramps to facilitate access to the oil sump. The lower splash guard is equipped with specific openings to access the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos