Do it yourself
| ||||
|
Hyundai Accent - Video tutorial
Model: Hyundai Accent
MK 1, LC
- Years 1999-2005 Brakes are one of the most important parts for safety on the road. Safety in the car is an essential condition of a good braking system. Car brake discs can be changed in a few simple steps. When it is time to replace them when they are worn out, many car manufacturers suggest replacing them after around 80,000 km or after replacing the pads twice or if the disc thickness is less than 2-3 millimeters. First the car must be jacked up and the rim removed after removing the wheel bolts. Take a hex wrench and unscrew all the bolts that hold the caliper firmly to the frame on the rear side. Then put the car on a flat surface and engage the gear to lock the front wheels. Later, it will be possible so the brake caliper. At this point, only the caliper bracket remains with the brake pads inside. The latter must be removed using a suitable flat screwdriver, paying particular attention not to damage the discs. The bolts that hold the bracket firmly to the hub must also be unscrewed. After that, only the brake discs will remain and can be replaced.
Posted on 16 August 2023 by ScegliAuto
Removal and replacement of brake pads
Hyundai Accent (1999-2005 / MK 1, LC) This video shows us how to remove and replace the front brake pads on our car. First we raise the car with the help of a bridge and remove the alloy
Bulb replacement on Hyundai Accent
Hyundai Accent (2010-2017 / MK 4, RB, RC) Open the hood and put on the special support rod. Simply unscrew the bottom cover behind the lights by hand. Unplug the connector, "pop" the metal cl
Replacing the car radio on Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) First get a plastic wedge (preferable) or a flat head screwdriver. This will be used to extract the mask that frames the car radio from its seat, lev Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.085
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |