Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How do you reset the service light on the Hyundai Santa Fe?

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Checks and maintenance
Operation: How do you reset the service light on the Hyundai Santa Fe?

In order to reset the Hyundai Santa Fe Service light, you need to turn on the instrument panel and then press the MENU button located on the right spoke of the steering wheel, until the screen shown in the video appears. Subsequently, it will be necessary to hold down the arrow button pointing to the left for a few seconds, until the present screen is modified with the new mileage missing at the next coupon. To be able to verify that the reset has taken place correctly, you will need to switch the instrument panel off and on again.


Posted on 31 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Santa Fe 2006-2012 - What to do if the handbrake of Hyundai Santa Fe 2 is not working? Read Answer
    • Santa Fe 2000-2006 - Where is the jack on the Hyundai Santa Fe? Read Answer
    • Santa Fe 2012-2018 - What are the spies of the Hyundai Santa Fe? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos