Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Service warning light

Resetting the oil service light on the 2018 Hyundai Santa Fe after replacing the filter and changing or topping up the oil is a very simple task that can be done independently in just a few minutes. Start by turning on the ignition of your Hyundai without starting the engine, then press the first button on the steering wheel to access the car's menu. Next, using the buttons on the steering wheel, navigate through the menu until you reach the "Service" option, then hold down the centre button for a few seconds until the reset is complete.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Hyundai Santa Fe
How to Reset the Oil Change Light on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) To reset the maintenance light on a Hyundai Santa Fe, follow this procedure: when the service light comes on, the first thing to do is replace the en…
How to reset the oil light on the 2020 Hyundai Santa Fe
How to reset the oil light on the 2020 Hyundai Santa Fe
Hyundai Santa Fe (2019-2023 / MK 4, TM) Today we will explain how to reset the oil light related to the car service and oil change on a 2020 Hyundai Santa Fe. To perform this simple operati…
How to Reset the Oil Warning Light on a 2023 Hyundai Santa Fe
How to Reset the Oil Warning Light on a 2023 Hyundai Santa Fe
Hyundai Santa Fe (2019-2023 / MK 4, TM) In this article, we show you how to reset the oil warning light, and thus the maintenance light, on the 2023 Hyundai Santa Fe. It is recommended to p…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos