Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Bullock Alarm on a Hyundai I10

Model: Hyundai I10 AI3, AC3 - Years 2019-2026
Part: Checks and maintenance

In this video, see how to install a highly effective alarm known as the Bullock on your Hyundai I10. You can find this type of alarm on Amazon, with the code B01MG5V4YA, priced at £61.00 with free delivery. Now, let's proceed with the installation: Remove the top screw, adjust the length of the arm, which should be positioned exactly at the second hole, where you will place the appropriate securing screw. Adjust the angle and position it on the steering wheel to make it impossible to turn. Finally, close the device with the key, keeping only one of the keys with you and storing the spare key in a safe place.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…
Hyundai I10 (2019-2026 / AI3, AC3) If our Hyundai I10, like all recently built cars, has a flat or deflated tire, we will see the warning light on the instrument panel light up. Once t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos