Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Remote control key battery replacement

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata EF - Years 1998-2005
Part: Key
Operation: Remote control key battery replacement

If the locks do not activate while pressing the remote control buttons, it is very likely that the internal battery of the remote control itself may have run out; making the replacement is very simple, in fact it is enough to lever the small slot on the corner of the remote control to be able to separate the two shells that compose it, then extract the electronic circuit that houses the battery and extract the latter from its seat; clean the metal contacts from any oxidation, measure the state of charge of the battery to make sure it is discharged and then insert the new one (CR2032) orienting it correctly and then close the remote control.


Posted on 4 September 2023 by ScegliAuto



How do you replace the battery of the Hyundai Sonata remote control?
Hyundai Sonata (2020-2024 / DN8) The procedure for replacing the remote control battery on the Hyundai Sonata involves pressing the button on the top back of the device: once this bu
How do you replace the battery of the Hyundai Sonata remote control?
Hyundai Sonata (2005-2010 / NF, MK 5) In order to replace the battery of the Hyundai Sonata remote control, you need to pry open the bottom part of the device so that you can detach the p
How to open the key and replace the shell of the Hyundai Sonata
Hyundai Sonata (2015-2019 / LF) Let's briefly see the process of disassembling the key and replacing its shell for the Hyundai Sonata. First, take the remote control and start pryin

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos