Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just behind the glove compartment. To access the air duct housing, open the glove compartment and locate the two knobs on the sides of the compartment that act as stops.

Rotate them to remove and then detach the outer rod that supports the glove compartment's movement, allowing it to swing down completely. At this point, unclip the cover of the cabin air filter housing, remove the filter from its seat, ensure there are no dirt residues inside, and insert the new filter before repositioning the cover and the clips of the door.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Hyundai Santa Fe (2000-2006 / MK 1) The cabin air filter is located on the passenger side, behind the glove compartment drawer: to perform the replacement, you need to open the door, un…
How to Replace the Cabin Air Filter of the Hyundai Santa Fe 2021
How to Replace the Cabin Air Filter of the Hyundai Santa Fe 2021
Hyundai Santa Fe (2019-2023 / TM, MK 4) If you want to improve the air quality inside your Hyundai Santa Fe (2021) while using the air conditioning, you need to replace the specific air fil…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Hyundai Santa Fe (2006-2012 / MK 2) The cabin air filter is located on the passenger side behind the glove compartment: to access and replace it, open the glove compartment door, detach…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos