Do it yourself
Frequently asked questions about cars and motorcycles

Issues to check before purchasing a used Hyundai IX 35

Model: Hyundai ix35 MK 1 - Years 2009-2015

In this video we can see what are the main problems we need to keep an eye on when buying a used Hyundai IX35: it is a reliable car with a very resistant engine, as long as regular maintenance has been done; around one hundred thousand kilometers there is however a problem with the valves, especially for cars that are driven a lot in the city and for those converted to gas. The diesel versions show high reliability both in the 1.7 version and in the 2.0 version, especially the latter has no problems in covering more than 200/250,000 kilometers: At the same time, the clutch and dual mass flywheel are not the best, and strange noises occur inside due to loose plastics, and even the stabilizer bars can be subject to noise: it is necessary to replace the shock absorbers and rear wheel bearings even after the first 100,000 kilometers, a distance where the suspensions may require repairs; pay attention to noises coming from the drive shaft area, and it is also necessary to check the functionality of the electronic part; noises coming from the gearbox, which is very reliable, can be eliminated with an oil change. Among the minor problems we can notice wear on the seat covers, some problems with the audio system and scratches on the plastics; there are no corrosion problems.

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Hyundai ix35 (2009-2015 / MK 1) To replace the gear knob on the Hyundai IX35, grasp the old knob and disconnect the internal clips that secure it to the corresponding lever. Once th…
Hyundai ix35 (2009-2015 / MK 1) In this video we will see how to reset the radio of a Hyundai IX35: we start with a soft reset, for which you just need to turn off the radio for 30 …
Hyundai ix35 (2009-2015 / MK 1) The reset of the service light for the Hyundai IX35 follows some simple steps that can be done independently. The first step is to turn on the instru…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos