Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulb

Model: Infiniti G - Years 2002-2007
Part: Headlight bulb

To replace the bulbs in the headlamps, you need to completely remove the wheel to access the front lighting. Unscrew the retaining screws of the cover, those under the wheel arch, and those under the bumper that secure the grille. Remove the wheel arch grille and you will finally have access to the headlamp. Remove the protective cap with a flat screwdriver and, using a T15 Torx key, unscrew the bulb holder, which should be gently pulled from its seat after disconnecting the electrical connector. Place the unit on a support and remove the bulb by taking out the clips. Install the new bulb. Refit the bulb holder in its respective seat and reposition the headlamp unit, connecting the relevant connector. Screw in the retaining screws and reassemble everything.

Updated on 8 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Dashboard Clock Bulb Replacement
Dashboard Clock Bulb Replacement
Infiniti G (2007-2015 / V36) To replace the backlight bulb of the clock located in the centre of the dashboard, first detach the plastic trim around the clock: simply lever along…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Infiniti G (2007-2015 / V36) The cabin air filter is located on the passenger side, behind the glove compartment, and to access it, you must completely remove the glove compartme…
Polishing Dull Headlamp Glass
Polishing Dull Headlamp Glass
Infiniti G (2002-2007 / ) If the headlamp glass becomes dull, instead of replacing the entire unit, you can polish the glass. For this task, you will need a drill equipped wit…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos