Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. QX50
    4. : How to replace the cabin filter in Infiniti QX50?

Infiniti QX50 - Video tutorial

Model: Infiniti QX50 MK 1 - Years 2013-2023
Part: Cabin air filter
Operation: How to replace the cabin filter in Infiniti QX50?

In this tutorial we can see how to replace the cabin air filter in your Infiniti QX50, a very simple and fast operation. First of all, open the glove compartment drawer on the passenger side, then, using a cross-tip screwdriver, unscrew all the screws indicated. Subsequently, we extract the entire compartment from the dashboard by disengaging the internal clips, place it on the ground and open the long rectangular flap. At this point we can remove the old filter and insert the spare one, taking care to position it in the right direction, sometimes indicated on the edge of the filter itself.


Posted on 22 November 2022 by ScegliAuto



How to replace the cabin filter in the Infiniti QX50?
Infiniti QX50 (2013-2023 / MK 1) Replacing the cabin filter in the Infiniti QX50 is an extremely simple and fast operation, let's see how to proceed in this tutorial. First of all, l
How to replace the cabin air filter in the Infiniti Qx55?
Infiniti QX50 (2013-2023 / MK 1) The cabin air filter in the Infiniti Qx50 is located behind the glove box, hidden by a plastic panel. To be able to replace it we must therefore firs
How to reset the service light in the Infiniti Qx50?
Infiniti QX50 (2013-2023 / MK 1) To reset the service light on the Infiniti Qx50, after carrying out the necessary interventions, we must press the button with the arrow pointing to

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos