Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the door opening alarm on the Isuzu D-Max.

Model: Isuzu Isuzu D Max Rt50, Rt85 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

See other generations:
Video tutorial

The door open alarm is activated to signal that the vehicle is running with the key inserted in the ignition switch and that the vehicle's doors are open or in the process of opening. This allows the driver to have maximum control over the passengers.

However, if we wish to deactivate the alarm on an Isuzu D Max vehicle, we simply need to disconnect the white connector located under the steering wheel cover. If the alarm continues to sound after disconnecting the connector, it may be necessary to reset the control unit or disable the alarm using diagnostic software and an OBD connector.


Posted on 19 December 2025 by ScegliAuto


Related tutorials

How to replace the door seals of the Isuzu D Max
How to replace the door seals of the Isuzu D Max
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) .. seals of the front and rear doors of the Isuzu D Max. This operation is very simple and quick to perform independently, the window seals can be purchased.. …
How to deactivate the passenger airbag on the Isuzu D-Max?
How to deactivate the passenger airbag on the Isuzu D-Max?
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) To deactivate the passenger airbag on the Isuzu D-Max, open the glove compartment on the front passenger side: in the upper left part, you will notic…
How to reset the trip computer on the Isuzu D-MAX
How to reset the trip computer on the Isuzu D-MAX
Isuzu Isuzu D Max (2011-2024 / Rt50, Rt85) In this video, you can see how to reset the trip computer on the Isuzu D-MAX: remember that the multifunction display is only operational when all th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos