Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Dilution on a 2021 Isuzu D-Max

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2024
Part: Warning light – error code

In this video tutorial, you can see how to reset the oil dilution on a 2021 Isuzu D-Max by following a few simple steps. First, perform maintenance on the vehicle, including an oil change and filter replacements. After completing the DIY maintenance, get into the vehicle and start the engine. At this point, you will notice that the service spanner warning light is on; turn off the vehicle, then close the door. Turn on the ignition without starting the engine, wait for all the lights to illuminate, press the accelerator, and after 20 seconds, the warning light will start to flash. After one minute, the light will flash more rapidly and then stop flashing, indicating that the oil change has been reset.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) If the yellow engine oil light illuminates on the dashboard of your 2021 Isuzu D-Max and you want to reset it manually, simply follow the instruction…
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) Today, with the help of this short video tutorial, you will learn how to reset the oil light on a 2011 Isuzu D Max. This reset must be performed afte…
Isuzu Isuzu D Max (2011-2024 / Rt85, Rt50) Resetting the oil light on a 2023 Isuzu D Max is a straightforward operation. First, turn on the vehicle's ignition and pull the handbrake lever. Nex…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos