Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you will see how to change the cabin air filter. First, open the bonnet, then remove the clips on the seal located between the windscreen and the engine.

To remove the clips, use a flathead screwdriver: lever on a small protruding square and pull up to release a sort of pin. You can now lift the entire seal and easily locate the old cabin air filter. Remove it from its compartment and replace it with a new one. Ensure it is positioned correctly.

Now refit the seal with the appropriate clips.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Remove the Engine Air Filter on a Jaguar XF
How to Remove the Engine Air Filter on a Jaguar XF
Jaguar Xf (2008-2015 / MK 1) How do you remove the engine air filter fitted on a Jaguar XF? Begin by pulling the plastic lever inside the car; open and lift the bonnet. Locate th…
Replacing the Car Fuel Filter
Replacing the Car Fuel Filter
Jaguar Xf (2008-2015 / MK 1) This guide shows how to replace your car's fuel filter. This operation will save you money as a clean fuel filter will lead to better fuel consumptio…
How to Replace the Fuel Filter on the Jaguar XF?
How to Replace the Fuel Filter on the Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) To replace the fuel filter on the Jaguar XF, lift the car to gain easier access to the components underneath: the filter is located inside the left f…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos