Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Jaguar Xj MK 3, X300 - Years: 1994, 1995, 1996, 1997
Part: Oil filter

See other generations:
Video tutorial

Changing the oil and its filter is typical DIY maintenance, but it is essential to dispose of everything properly afterwards. Lift the vehicle on suitable car ramps to facilitate access to the oil sump, remove the protective plate located just under the filter, and proceed to drain the used oil and replace the filter: coat the gasket of the new filter with oil before screwing it on to improve adhesion and apply a new washer to the oil sump plug; fill the engine with clean oil, start the engine for a few minutes, then check the level after lowering the car from the ramps.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Jaguar XJ
How to Replace the Air Filter on a Jaguar XJ
Jaguar Xj (2003-2007 / X350) In this video tutorial, we can see how to replace the air filter on a Jaguar XJ: the first step is to purchase a new air filter from an authorised de…
Replacing Your Car Remote Battery
Replacing Your Car Remote Battery
Jaguar Xj (1986-1994 / XJ 40, MK 4) Replacing the battery in your car remote is a very simple task. If there is an internal compartment in the remote, the battery replacement generally …
How to Replace the Cabin Air Filter in the Jaguar XJ
How to Replace the Cabin Air Filter in the Jaguar XJ
Jaguar Xj (2009-2019 / MK 9, X351) To correctly replace the cabin air filter in your Jaguar XJ, follow the steps in this mini guide. First, reach the front passenger seat and focus on …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos