Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jaguar I-Pace

Model: Jaguar I-Pace MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

In this video, you can see how to reset the maintenance light on a Jaguar I-Pace. This procedure is very simple and quick. To perform the reset, first open the driver's door and the engine bay. Then, start the instrument panel without starting the engine and press the brake and accelerator pedals simultaneously for 10 seconds.

After 10 seconds, a light will appear indicating that the reset is complete. At this point, release the pedals and use the menu navigation buttons to check via the vehicle information that the reset has been successful.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning on the Jaguar I-Pace
How to Reset the Tyre Pressure Warning on the Jaguar I-Pace
Jaguar I-Pace (2019-2026 / MK 1) .. reset the tyre pressure warning on the Jaguar I-Pace. Before resetting the TPMS sensors, ensure all four tyres are at the correct operating pressure... …
Jaguar I-Pace: The Electric Sport Utility!
Jaguar I-Pace: The Electric Sport Utility!
Jaguar I-Pace (2019-2026 / MK 1) .. In this video, we will present the new Jaguar I-Pace with a stunning new design. Dubbed a Sport Utility, it is a mix of SUV, city car, and sports car... …
How to Change the Key Battery on a Jaguar I-Pace
How to Change the Key Battery on a Jaguar I-Pace
Jaguar I-Pace (2019-2026 / MK 1) .. needed to replace the key battery of a Jaguar I-Pace. The required battery for this type of key is a CR2032 3-volt battery. First, extract the emergency.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos