Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil of the Jeep Renegade

Model: Jeep Renegade MK 1, 520, BU - Years 2014-2024
Part: Engine oil

To carry out this simple and quick routine operation it will obviously be necessary to lift your car and place it on special pedestals, therefore, after removing the lower protective panel you can remove the oil pan cap by equipping yourself with a container under it, then now proceed to remove the old oil filter and install the new one, now you will have to reposition the oil pan cap in order to then insert the new oil inside the engine, then retrace the steps described backwards for reassembly .

Posted on 7 April 2019 by ScegliAuto

Video tutorial

Related tutorials

Engine oil replacement on Jeep Renegade
Jeep Renegade (2014-2024 / MK 1, 520, BU) Changing the oil on Jeep Renegade? Let's see how the engine oil on Jeep Renegade drains. We open the car door and pull up the engine compartment open…
How to replace automatic gearbox oil on Jeep Renegade
How to replace automatic gearbox oil on Jeep Renegade
Jeep Renegade (2014-2024 / MK 1, 520, BU) Today we see how to change the automatic gearbox oil on Jeep Renegade, the same procedure can also be used on Jeep Compass. First we lift the car and…
Changing oil on Jeep Renegade
Changing oil on Jeep Renegade
Jeep Renegade (2014-2024 / MK 1, 520, BU) Replacing the oil and filter on a Jeep Renegade? Let's see how to remove it from inside the engine compartment. We lift the bonnet and put it in safe…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos