Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Oil filter

Video tutorial

How to replace the engine oil filter on a Jeep Renegade? Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet and secure it. Use a socket spanner to unscrew the large securing bolt of the oil filter housing.

Remove the air filter kit (if necessary) to access the housing and extract the worn oil filter, then position a new one. Lift the car on a jack and unscrew the bolt from the oil sump; allow the fluid to drain into a container.

Finally, top up with new oil and close the bonnet.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Oil Change on a Jeep Renegade
Oil Change on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Changing the oil and filter on a Jeep Renegade? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench t…
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Engine Oil and Oil Filter Replacement on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Jeep Renegade during a regular maintenance service. First, o…
Engine Oil Change on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Changing oil on a Jeep Renegade? Here’s how to drain the engine oil on a Jeep Renegade. Open the car door and pull up the engine compartment release …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos