Do it yourself
Frequently asked questions about cars and motorcycles

How to change the oil and oil filter in a Jeep CJ.

Model: Jeep Cj CJ7, MK 7 - Years 1976-1986
Part: Engine oil

Below you will find instructions on how to change the oil and the oil filter in the Jeep CJ. The steps are simple and quick, and they are as follows. First, let's go under the car, locate the oil pan, and remove the plug to drain the used oil from the pan. Use a basin to collect the used oil. At this point, we move on to the filter located on the left side of the engine block near the wheel, as shown in the video. We unscrew it and replace it with a new filter. After doing all this, we put the plug back in the pan, and finally, we can pour in new oil, and the procedure is complete.

Posted on 24 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Jeep Cj (1976-1986 / CJ7, MK 7) This guide shows how to replace the starter motor on Jeep CJ (Civilian Jeep). These models often have starter operation issues. The first step is to …
Jeep Cj (1976-1986 / CJ7, MK 7) The aim of this video is to add two new anchor points to install seat belts on the Jeep CJ. Create one point on the roll bar at shoulder height, and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos