Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Wheel on Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Wheel

To replace a tyre on the Jeep Cherokee, first set the appropriate option in the onboard computer menu for your safety. First, take the spare tyre located in the front bonnet. To retrieve it, extract the jack and the key needed to unscrew the bolts. Now, unscrew the knob to release the wheel. At this point, unscrew the bolts of the wheel you want to replace. Naturally, this must be preceded by necessary safety precautions: position the vehicle on a flat, non-slip surface, switch off the engine, etc. Then, lift the car using the jack, positioned in the designated area (taking care to immobilise the opposite wheel to the one being replaced), replace the tyre, lower the car, tighten the respective bolts, and you're done!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change a Wheel on a Jeep Cherokee MK5 (2018)
How to Change a Wheel on a Jeep Cherokee MK5 (2018)
Jeep Cherokee (2013-2023 / KL, MK 5) In this brief and simple guide, follow step-by-step instructions to remove and replace the wheel with the spare on the Jeep Cherokee fifth generation…
Replacing Brake Pads on a Jeep Cherokee
Replacing Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Are the brake pads due for replacement? Let's see how to remove them from the front brakes of a Jeep Cherokee. Lift the vehicle with a column lift (j…
How to Replace the Timing Belt on a Jeep Cherokee 2.0 Multijet
How to Replace the Timing Belt on a Jeep Cherokee 2.0 Multijet
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn the main steps to remove and replace the timing belt on a Jeep Cherokee with a 2.0 Multijet engine. First, lift the veh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos