Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Speakers on Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Speaker

See other generations:
Video tutorial

Do you want to remove the speakers from the dashboard of the Jeep Wrangler? Here's how to take them out from inside the dashboard. Disconnect the battery terminals located in the compartment.

Unscrew the securing screws located in the plastic dashboard to free it. Once all screws are removed, use a lever to detach the plastics that secure the dashboard. Unscrew the screws securing the speaker embedded in the dashboard plastics (disconnect the power).

Install the new speakers: tighten the screws and connect the electrical terminals. Finally, refit the cover plastics.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Speakers in the Door of a Jeep Wrangler
How to Remove the Speakers in the Door of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Remove the speakers in the door of the Jeep? Let's see how to disassemble the panel in the Wrangler door. Open the car door, locate where to remove t…
Replacing the Front Speakers in a Jeep Wrangler
Replacing the Front Speakers in a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Let’s briefly go through the instructions to remove and replace the front speakers in a Jeep Wrangler in simple steps. First, open the driver's side …
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos