Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Instrument Cluster Bulbs from Jeep Wrangler

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Instrument panel light

Today, you will learn how to remove and replace the instrument cluster lights in a first-generation Jeep Wrangler. First, get inside the vehicle and remove the upper plastic part of the cluster by unscrewing all the screws. Next, unscrew any additional screws found underneath and extract the instrument cluster by disconnecting the electrical connectors at the back. At this point, use a pair of pliers to extract the bulbs by turning them to the side for removal. Then, replace them with new ones of the correct type and reassemble the cluster!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove and install the indicator bulbs of the Jeep Wrangler mirror
How to remove and install the indicator bulbs of the Jeep Wrangler mirror
Jeep Wrangler (2018-2026 / JL, MK 4) This guide outlines the steps to remove and install the indicator bulbs of the side mirrors on the Jeep Wrangler. First, move to the side of the vehi…
Removing the Door Panel on a Jeep Wrangler
Removing the Door Panel on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Let's remove the right front door panel on a Jeep Wrangler. Disconnect the battery terminals located in the engine bay, and using a screwdriver, unsc…
How to Replace the Front Bulbs of the Jeep Wrangler
How to Replace the Front Bulbs of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this video, you will learn how to replace the front bulbs of the third series Jeep Wrangler, American model. Start by removing the front grille, t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos