Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

See other generations:
Video tutorial

In this video tutorial, see how to disassemble and replace the battery of the key fob on a second-generation Jeep Compass. First, take your key fob and extract the key inside it; then, pry open the fob using something thin to split it into two parts, as shown in the video.

At this point, you have access to the circuit board and the battery, which you will remove and replace; insert the new battery, of the correct type, in the correct orientation and reassemble everything, following the video to the end!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Jeep Compass
Replacing the Key Fob Battery for the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) This guide will show you how to disassemble and replace the battery in the key fob for the Jeep Compass. First, take the key fob and extract the phys…
How to Replace the Key Fob Battery on a Jeep Compass?
How to Replace the Key Fob Battery on a Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) To replace the key fob battery on a Jeep Compass, loosen the screw located just below the key. By loosening this screw, you can open the fob and acce…
How to Replace the Key Fob Battery on the Jeep Compass
How to Replace the Key Fob Battery on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how easy it is to replace the battery in the key fob for the Jeep Compass. Note: if the Jeep remote is not workin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos