Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery for the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Key

This video shows how easy it is to remove the battery from the remote key for the Jeep Renegade. Simply insert a small flat screwdriver into the seam of the remote key shell, lever it open, and remove the cover. At this point, use the small flat screwdriver to extract the old battery. Once the old battery is removed, insert the new battery, which must be a CR 2032 3V, to ensure proper functioning of the remote. After inserting the new battery, reassemble the remote in reverse order. Test its operation by locking and unlocking the vehicle.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…
How to Replace the Key Fob Battery on a Jeep Renegade
How to Replace the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the key fob battery on a Jeep Renegade, first, pull out the metal key from its slot by unlocking the release lever. Once extracted, insert…
How to Replace the Key Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) Let's see how to replace the key battery on a Jeep Renegade. Get a new battery and a small flathead screwdriver. First, extract the metal key from th…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why is the electronic key no longer detected in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos