Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Door trim panel

Remove the plastic on the front pillar and disconnect the connectors for the mirror. Detach the small protective plastic near the internal handle using a small flat screwdriver, as well as the one behind the window switch buttons. Unscrew the screws that are now exposed. Using a plastic trim tool or any other non-scratching cutting tool, detach the entire central area of the door panel, pulling it out of its housing a little at a time. Once this is completely detached, you can repeat the process with the speaker. Disconnect all connectors and unscrew ALL screws that are now exposed to complete the removal.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel of a Jeep Compass
Removing the Rear Door Panel of a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will learn how to remove the door panel of a second-generation Jeep Compass in simple steps. First, open the rear door an…
How to Remove the Door Panel (Right Side) on Jeep Compass
How to Remove the Door Panel (Right Side) on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) To remove the door panel (front right) on a Jeep Compass: disconnect the battery terminals located in the engine compartment, use a screwdriver to un…
How to Remove the Door Panel on the Jeep Compass?
How to Remove the Door Panel on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, see how to remove the driver's door panel on the Jeep Compass, a very simple task. First, open the door in question, then remove th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos