Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Rear Brake Shoes on a Jeep Wrangler

Model: Jeep Wrangler MK 1, YJ - Years 1987-1996
Part: Brake drums and shoes

In today's video tutorial, you will learn how to adjust the rear brake shoes on a Jeep Wrangler by following the instructions below. First, lift the vehicle and position yourself behind the wheel to remove the small adjustment cap of the brake shoes, as shown in the video. Now adjust the adjuster by turning the nut found inside the drum; once the adjustment is made, check the operation of the rear brakes and the handbrake, following the video to the end!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (1997-2007 / MK 2, TJ) In this video, you will find the main instructions for cleaning and restoring the rear drum brakes and how to adjust them on a first-generation Jeep …
Jeep Wrangler (2007-2018 / MK 3, JK) In order to adjust the handbrake of the Jeep Wrangler, you need to lift the car so that you can loosen the screws that secure the rear right wheel: o…
Jeep Wrangler Change engine oil in the Jeep Wrangler. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos