Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Transfer Case Fluid in a Jeep Wrangler JK

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

The video shows how to replace the transfer case fluid in a Jeep Wrangler JK. Remove the lower skid plate. Use an Allen key to first undo the upper hex nut and then the lower one. After draining all the fluid into a suitable container, screw in the lower nut without over-tightening.

Siphon the new synthetic fluid, which lasts longer, into a pump and then inject it into the transfer case through the pump. Repeat this process until the fluid is injected up to the highest hole of the case.

Then refit the nut and tighten it. Refit the skid plate.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil of a Jeep Wrangler
How to Change the Transmission Oil of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this guide, learn how to change the oil in the transmission of a Jeep Wrangler. Position your vehicle on a column lift and raise it to a comfortab…
How to Replace the Antifreeze in the Jeep Wrangler
How to Replace the Antifreeze in the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) This guide shows how to bleed and replace the coolant in the Jeep Wrangler by following these simple steps. First, remove the lower engine cover to a…
How to Change the Oil and Filter on a Jeep Wrangler
How to Change the Oil and Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Want to change the oil and filter on your Jeep Wrangler? No worries. Follow these steps. Lift the bonnet and secure it, then use a socket wrench to u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos